MACHINE DETAILS
Film unwinding & feed
The rear-mounted roll and guide rollers feed the packaging film toward the forming unit.
SINGLE-LANE / LIQUID PUMP FILLING
Single-Lane Liquid Stick Packaging Machine
VP-320P · Liquid pump filling
Single-lane stick packaging with a liquid filling pump. Coordinate the pump, nozzle and back-seal packing unit around your liquid, dose and film.
- 5–30 mLlisted dosing range
- 18–40packs/minute · reference range
- Liquid pumpliquid dosing
A CLOSER LOOK / VP-320P
See the details
behind the finished stick
Start with the dosing assembly for your material, then explore the forming, sealing and cutting platform shared by our single-lane VP-320 configurations.
LIQUID DOSING
A pump matched to the liquid
The filling pump delivers a measured liquid dose through the nozzle. Review viscosity, filling temperature, nozzle shutoff and the product-contact parts around the liquid you run.
- 5–30 mL listed dosing range
- Liquid-compatible parts and cleaning method selected for the application
SHARED SINGLE-LANE MACHINE DETAILS
Inside the packing unit
Explore the film handling, forming, sealing, coding, cutting and controls used across our single-lane configurations. The dosing assembly changes with the material.
MACHINE DETAILS
Forming & back sealing
The former shapes rollstock around the filling tube, while the longitudinal sealing unit makes the back seal.
MACHINE DETAILS
End sealing & film advance
The transverse sealing carriage closes the end seals and pulls the film forward. Finished packs continue to the separate cutting station below.
MACHINE DETAILS
Date & lot coding
The ribbon coding unit shown marks the film before it becomes a finished pack. Select the coding setup and printed information for your product.
MACHINE DETAILS
Separate cutting & discharge
A dedicated station below the pulling and sealing carriage separates the finished sticks and directs them to discharge.
MACHINE DETAILS
Operator controls
The operator panel brings the touchscreen, temperature displays and emergency stop together beside the packing unit.
Detail photographs illustrate shared packing components across our single-lane configurations. Auger, volumetric-cup, pump and combination-weigher dosing assemblies are shown separately on their product pages. Coding and other accessories are defined in the supplied equipment package.
HOW IT WORKS / VP-320P
Follow the liquid
See the complete cycle
Watch the complete cycle, then select any step to keep that movement playing on repeat.
VP-320PLiquid pump filling
Follow the film path
Rollstock passes over guide rollers. On printed film, the eye-mark sensor provides a reference for registration.
Turn flat film into a tube
The forming collar wraps the film around the filling tube. The longitudinal sealing bar joins the film edges to make the back seal.
Draw in, then dispense
The piston retracts to draw liquid into the dosing cylinder, then advances to deliver the portion through the filling nozzle. The selected stroke, pump and nozzle are matched to the liquid and dose.
Seal, pull, open and return
The pulling / sealing jaws close to make the transverse seal and move downward to advance one pack length. They then open and return. The film stays connected until it reaches the separate punch-cutting station below.
Cut at the separate lower station
Below the pulling / sealing jaws, a separate punch-and-die station cuts through the sealed area. Only after this cut does the individual stick separate and drop into collection.
Full cycle
About this illustration
Based on the supplied VP-320P liquid-pump configuration, pump photograph and the VP-320 packing-unit manual. The pump is shown as a piston-dosing functional section. Valve switching, liquid paths and nozzle travel are simplified; the exact supplied valve and nozzle arrangement is confirmed for the liquid. Film thickness, part travel and timing are exaggerated. The VP-320 lower punch-cutting station remains separate from the pulling/sealing carriage.
CONFIGURATION & FACILITY PLANNING
VP-320PPlan the format
and the complete system
Reference values for this configuration. Confirm your product, dose, film and required output with our team. Allow space for the dosing assembly, product supply and finished-pack handling.
Request a configured quote ↗| Model | VP-320P |
|---|---|
| Dosing method | Liquid pump filling |
| Lanes | 1 |
| Packaging speed reference | 18–40 packs/minute · product and format dependent |
| Dosing range reference | 5–30 mL |
| Bag length | 1.97–6.30 in (50–160 mm) |
| Bag width | 0.79–5.91 in (20–150 mm) |
| Maximum film width | 12.60 in (320 mm) |
| Bag type | Back seal |
| Packing-unit dimensions (L × W × H) | 47.24 × 27.56 × 59.84 in (1200 × 700 × 1520 mm) |
| Packing-unit weight | 881.8 lb (400 kg) |
| Packing-unit listed power | 2 kW |
| Compressed-air pressure | 94.3 psi (0.65 MPa) |
| Compressed-air consumption | 10.6 cfm (0.3 m³/min) |
| U.S. electrical configuration | 220 V, 60 Hz; phase and complete connected load confirmed with the selected package |
| Pump assembly dimensions (L × W × H) | 45.28 × 21.65 × 31.50 in (1150 × 550 × 800 mm) |
| Pump assembly weight | 132.3 lb (60 kg) |
| Pump product-contact parts | Stainless steel; seals and compatibility selected for the liquid |
Dimensions and weights for the packing unit are listed separately from the dosing module and accessories. The project quotation defines the complete footprint, connected load and supplied equipment.
COMPARE FOUR DOSING OPTIONS
What will you fill?
Choose around the material and dose, then compare the pack format and production target. Each configuration has its own product page.
| Configuration | VP-320Y ↗ | VP-320YL ↗ | VP-320P ↗ | VP-400YW ↗ |
|---|---|---|---|---|
| Dosing method | Auger filling | Volumetric-cup filling | Liquid pump filling | Combination weighing |
| Material starting point | Powders with poor flow | Free-flowing powders & granules | Liquids | Granules, flakes & solid pieces |
| Dose reference | 1–200 g | 2–100 mL | 5–30 mL | 10–1,000 g |
| Packaging speed reference | 18–40 packs/min | 20–35 packs/min | 18–40 packs/min | 20–50 packs/min |
| Bag width reference | 0.79–5.91 in (20–150 mm) | 0.79–5.91 in (20–150 mm) | 0.79–5.91 in (20–150 mm) | 1.97–7.87 in (50–200 mm) |
Ranges are configuration references and depend on the product and pack format. VP-400YW is a separate weighing and pouch-packaging configuration; its specifications do not apply to the VP-320 machines.
SUPPORT THROUGH PRODUCTION
The equipment is
only the beginning.
Practical support from selection through production. Services, scheduling and responsibilities are agreed for your project.
Select & plan
Review the application, equipment scope, FAT and delivery plan before the machine ships.
Discuss your project ↗Install & start up
Arrange installation assistance, commissioning, operator training and production coaching.
Explore startup support ↗Keep production moving
Talk with our San Diego team about maintenance, troubleshooting, parts and repair.
Ask for technical support ↗EQUIPMENT FINANCING
Plan the machine.
Explore the payment options.
Ask about financing for an eligible equipment purchase, with an equipment quote and payment terms reviewed together.
Financing is subject to approval and program availability.