Volumetric cup dosing
The rotating cup arrangement meters material by volume before discharge into the forming tube.
POWDER & GRANULE / SINGLE LANE
Single Lane Stick Packaging Machine
VP-320YL · Volumetric Cup Filling
Single-lane stick packaging with volumetric cup dosing. Review the cup volume and your material’s flow and bulk density, then match the forming and sealing setup to the pack.
- 20–35packs/minute · reference range
- 2–100 mLdosing range · select the format
- Single laneback-seal pack forming
SEE VP-320YL AT WORK
Watch the machine.
See the dosing method.
Volumetric Cup Filling demonstration from Encap North America. Review the material feed, dosing and pack-forming cycle.
Discuss a material trialPlays here · Connects to YouTube
ENCAP NORTH AMERICA / YOUTUBE
Open on YouTube VP-320YL · Volumetric Cup Filling
A CLOSER LOOK / VP-320YL
See the machine.
Understand the setup.
Review the dosing assembly and film-handling arrangement for your product.
Choose the cup for the material
Review the cup setting against your target fill, material flow and bulk density during a dosing trial.
One lane, coordinated forming
The packing unit coordinates servo film pulling, back sealing, end sealing and cutting.
Equipment photographs from the model quotation. Loading and other supporting equipment are selected separately.
HOW IT WORKS
From rollstock
to a finished stick.
One lane coordinates forming, dosing, sealing and cutting.
- 01
Feed rollstock
Unwind the selected packaging film and follow its registration marks.
- 02
Form & back-seal
Shape the film around the former and make the longitudinal seal.
- 03
Dose the fill
The cup arrangement meters a volume of material into the forming tube.
- 04
Make the end seal
Coordinate the transverse sealing cycle with the selected fill and film.
- 05
Cut & collect
Separate the finished sticks and transfer them for collection.
CONFIGURATION & FACILITY PLANNING
VP-320YL / Volumetric Cup FillingPlan the format.
Check the connections.
Reference values from the model quotation. Output and fill range depend on the material, stick format and selected dosing parts. Dimensions below refer to the packing unit; allow space for the dosing and loading equipment.
Bring these details to the discussion
- Material, target fill and dosing-trial goals
- Stick width, length, film and print repeat
- Available electrical supply, compressed air and loading method
| Model | VP-320YL |
|---|---|
| Dosing method | Volumetric Cup Filling |
| Lanes | 1 |
| Packaging speed | 20–35 packs/minute · material and format dependent |
| Dosing range | 2–100 mL |
| Package length | 1.97–5.91 in (50–150 mm) |
| Package width | 0.79–5.91 in (20–150 mm) |
| Maximum film width | 12.60 in (320 mm) |
| Seal format | Back seal |
| Dosing hopper capacity | 7.9 US gal (30 L) |
| Packing-unit dimensions (L × W × H) | 47.24 × 27.56 × 59.84 in (1200 × 700 × 1520 mm) |
| Packing-unit weight | 771.6 lb (350 kg) |
| Compressed-air pressure | 94.3 psi (0.65 MPa) |
| Compressed-air consumption | 10.6 cfm (0.3 m³/min) |
| U.S. electrical configuration | 220V, 60Hz; phase and complete connected load confirmed with the selected package |
| Packing-unit listed power | 2 kW |
Need a layout or utility schedule?Request the configuration sheet for the complete machine and its selected dosing and loading equipment.
COMPARE DOSING METHODS
Two products.
Choose around the material.
Each model has its own dosing arrangement, specification and demonstration video.
BEFORE YOU SPECIFY
Questions for your application.
Can I change the stick dimensions?
Length changes can be set on the packing machine. A different pack width requires the appropriate forming device and a review of the film and seal setup.
Which dosing method should I choose?
Volumetric cups meter a volume rather than directly weighing each fill. Review material flow and bulk-density variation against your target fill.
What supporting equipment can be included?
Discuss material loading, a finished-pack conveyor and a coding device as separate options. The quotation defines what is included and the complete utility requirements.
SUPPORT THROUGH PRODUCTION
The equipment is
only the beginning.
Practical support from selection through production. Services, scheduling and responsibilities are agreed for your project.
Select & plan
Review the application, equipment scope, FAT and delivery plan before the machine ships.
Discuss your project ↗Install & start up
Arrange installation assistance, commissioning, operator training and production coaching.
Explore startup support ↗Keep production moving
Talk with our San Diego team about maintenance, troubleshooting, parts and repair.
Ask for technical support ↗EQUIPMENT FINANCING
Plan the machine.
Explore the payment options.
Ask about financing for an eligible equipment purchase, with an equipment quote and payment terms reviewed together.
Financing is subject to approval and program availability.