Electronic counting channels
Vibration moves capsules along the channels toward the counting sensors and preset-count discharge.
CAPSULE & TABLET POUCH PACKAGING
Capsule & Tablet Stand-Up Pouch Packaging Line
CXD-2 Integrated pouch packaging system
Move from plastic bottles to stand-up pouches with a capsule and tablet packaging solution built around your goal of using less plastic.

INSTALLED IN SAN DIEGO
Our post-installation trial brings the three machines together: the counter, the desiccant feeder and the premade-pouch packer.
Follow the real product path, then explore the cycle in the animation below.
Explore the working principle ↓3:26 · Plays here · Connects to YouTube
Post-installation trial · Published November 14, 2026. Poster: factory test photograph.
A CLOSER LOOK
Factory test photographs show how the counter, sachet feeder and pouch-handling components connect.
Vibration moves capsules along the channels toward the counting sensors and preset-count discharge.
Individual desiccant sachets are sorted in a vibratory bowl before entering the feeding conveyor.
The feeder presents loose sachets for coordinated delivery to the common receiving hopper.
The counter outlet and desiccant chute both feed this receiver. It lowers slightly into the open pouch before filling starts.
Empty pouches are loaded as a stack, ready for individual pickup and transfer.
The opening assembly uses suction and gripping components to prepare the pouch mouth for filling.
The filling outlet extends slightly inside the open pouch while capsules and desiccant pass through.
Gripping, opening and transfer components coordinate the pouch through the filling and closing cycle.
Photographs show this project’s factory test configuration. Supplied parts and options are defined in the agreed solution scope.
WORKING PRINCIPLE
The hopper lowers into the open pouch before feeding begins. Capsules and desiccant meet in this shared path and enter the pouch, with gentle hopper movement to help keep capsules flowing.
Cutaway schematic · Product visible through equipment · Motion and timing simplified
FOLLOW THE POUCH
A pouch is picked from the magazine and opened at the filling station.

REFERENCE CONFIGURATION
The CXD-2 project combines an eight-channel counter, a loose-sachet desiccant feeder and a premade-pouch packing module.
The dimensions here are the CXD-2 quotation’s pouch reference range. Confirm the selected pouch, zipper and complete line layout with Encap.
| System model | CXD-2 |
|---|---|
| Product dosing | Electronic counting for capsules and tablets |
| Desiccant handling | Loose sachets · vibratory bowl and feeding conveyor |
| Filling connection | Common receiving hopper; combined discharge into the pouch |
| Pouch format | Premade stand-up pouches, including a selected zipper format |
| Pouch width | 70–280 mm / approx. 2.8–11.0 in |
| Pouch length | 80–440 mm / approx. 3.1–17.3 in |
| Pouch handling | Magazine feed, opening, filling, heat sealing and release |
| Line output | Selected around the product, count per pouch, sachet and pouch format |
ANOTHER ROUTE BEYOND BOTTLES
A stand-up pouch offers another format for multi-count capsules and tablets, including projects aiming to reduce plastic use.
Compare a pouch with your current bottle at the same product count. Include the bottle, cap, seal and label, and the pouch with its closure. The selected materials and pack weights determine whether and how much plastic is reduced.
Same product count
Choose the pouch barrier, closure and desiccant around your product’s protection needs.
START WITH YOUR APPLICATION
These details help us select the counting setup, sachet-feeding parts and pouch-handling arrangement together.
COMMON QUESTIONS
This solution opens and fills premade pouches. A stick-pack machine forms narrow packs from roll film. Here, the empty pouch is already made before it enters the magazine.
In this installation, the receiving hopper first lowers slightly into the open pouch. Counted product and desiccant then enter that shared hopper and pass into the pouch. The hopper moves gently during filling to help prevent capsules from lodging.
Share its model, discharge arrangement and control interface with us. We can assess the connection, working height and coordination required for your project.
Send product and pouch samples, the required count and the desiccant format. We select the feeding and pouch-handling arrangement around those materials.
“Stand-up pouch” is the main format term used here. “Premade pouch” explains how it is supplied to the machine. The page focuses on capsule and tablet counting into that finished pouch format.
PLAN YOUR POUCH SOLUTION
Tell us what you want to pack, how many per pouch and the output you need.